OMP AQUAPOL 001
SPECIFICATIONS

MISSION MODULE FOR THE POTABILITY OF BRACKISH AND MARINE WATER
Product designed for the Italian Armed Forces.
NATO code 4610-15-200-1407
- Part Number: OMP ACQUAPOL 001

OMP AQUAPOL 001 is a mission module capable of purifying, storing and distributing drinking water drawn from any brackish or marine water source.
The water purifier can be used for the immediate supply of drinking water directly from rivers, canals, lakes, polluted pipelines, sea and wells. OMP 001 AQUAPOL is used in the field by the Italian Armed Forces, civil defense groups, non-governmental organizations and construction companies.

OMP 001 AQUAPOL is a purification unit which uses the principle of reverse osmosis to produce up to 3,500 litres/hour of drinking water (up to 60 cubic metres per day) from brackish and sea water. According to UN data, this is sufficient potable water to ensure the daily needs of more than 1,200 people for drinking, washing and cooking.
The module contains a tank with a capacity of 2,000 litres to provide and ensure drinking water reserve at peak demand levels at any time of the day.
The potable water module was built to NATO standards for a container certified type ISO 1C (20 ft x 8 ft x 8 ft). The materials and coatings are approved and provide protection for long periods, even in heavy use. The module has one side which can be opened fully for easy access, use and maintenance.
The compact design allows an optimisation not only of the use but also the transportation and delivery in the field. The module can be connected to an electrical network or can be supplied with its current generator. OMP AQUAPOL 001 can be equipped with an alarm system with GSM and RFID to allow a remote control of the unit.

The module was designed and built around four key principles that characterise all OMP products:
- rapid deployment;
- rapid use;
- high levels of reliability;
- ease of maintenance.
The quality of the drinking water produced by the OMP AQUAPOL 001 module is certified by the University of Padova, Faculty of Engineering, Department of Chemical Engineering of Processes.
OMP AQUA CUBE
SPECIFICATIONS

MISSION MODULE FOR THE TREATMENT OF BRACKISH AND SEA WATER, AIR TRANSPORTABLE AND LOW ENERGY CONSUMING
Product designed for the Italian Armed Forces.

Module for the treatment of brackish and sea water to provide up to 290 litres of drinking water per hour. The module is designed to fit an IATA LD8 container, permitting transport on civilian aircraft and a maximum of flexibility in the organization of shipments in emergency situations.

This feature combined with the maximum rapidity of deployment makes OMP AQUA CUBE particularly suitable for emergencies. OMP AQUA CUBE is fully autonomous and self-sufficient thanks to the use of photovoltaic panels and a wind generator mounted on a pneumatic telescopic aluminium alloy mast.

The module is able to function 24/24 without additional costs or electricity or other fuels. Alternatively it may be operated with either 220 volt AC, 110 volt AC or 24 volt DC sources through a universal transformer.
Ideal in many situations, ready and easy to use.

The OMP AQUA CUBE includes a solar pump with a flow rate of about 1000 l/h, a system for the automatic washing of the filters and a practical control system. This efficient treatment unit removes viruses and bacteria without the need for any chemical additives in the water.

The module has been designed and built around four key principles that characterise all OMP products:
- rapid deployment;
- rapid use;
- high levels of reliability;
- ease of maintenance.
The quality of the drinking water produced by the OMP AQUA CUBE is certified by the University of Padova, Faculty of Engineering, Department of Chemical Engineering of Processes.
OMP AQUA SOL
SPECIFICATIONS

MISSION MODULE FOR THE POTABILITY OF BRACKISH AND MARINE WATER, LOW ENERGY CONSUMPTION
Product designed for the Italian Armed Forces. NATO code 4610-15-189-4798 - Part Number: OMP AQUA SOL

OMP AQUA SOL is a filtration system with low power consumption that uses the principle of reverse osmosis to produce up to 1400 litres of potable water per day from sea and brackish water.
According to UN data, this production capacity is sufficient to ensure 30 people enough potable water for daily needs: drinking, cooking and washing. The purification system operates efficiently, safely and reliably for hundreds of hours without requiring special maintenance except for the checking and cleaning of the pre-filters. The module is rugged and built with materials resistant to corrosion and falls. The lightness, compactness and efficiency of the overall design makes it incredibly easy to transport.

OMP AQUA SOL is powered by solar energy or directly connected to a 12/24 volt battery. It produces more water for the same energy consumption than any other small scale system on the market today.

These features make OMP AQUA SOL suitable for emergency situations or for use in remote areas characterised by difficult conditions. Ideal for the Armed Forces and civil defense camps, humanitarian associations, and construction companies.
OMP POT 002
SPECIFICATIONS

FOR POTABILIZATION OF BRACKISH AND SALT WATER
Product designed for the Italian Armed Forces.

OMP POT 002 is a water treatment unit that uses the principle of reverse osmosis to produce up to 1500 liters of drinking water per hour (up to 30 mc per day) from brackish and salt water.
Production Capacity 800 - 1200 liters / hour
Surface pump capacity about 2000 liters / hour
Submergible pump capacity about 2000 liters / hour max depth 45 metes
Tank capacity 9500 - 10000 liters stainless steel tank
Operational temperature water from +1°C a +40°C
Power alimentation 3 fases 400 V 50/60 Hz
Power consumption max 22 kVA
External dimensions ISO 1C shelter 20 ft x 8 ft x 8 ft
Weight 6000 kg


OMP PRE 001
SPECIFICATIONS

MISSION MODULE FOR THE PRE-TREATMENT OF WATER
Product designed for the Italian armed forces.

Totally self contained, transportable module designed to pre-treat muddy water prior to complete purification. Used to support any OMP module for water cleaning in extreme conditions.
A water purifier which can be used differently by multiple institutions: the armed forces, civil defense groups, by humanitarian aid organisations, civil engineering units. Despite its compact size, the module is extremely efficient with the advantage that it is easy to transport and employ in the field.
The wide range of configurations available also includes solutions to problems related to the elimination of toxic substances from possible chemical attacks, radioactive contamination and pollution caused by bacteria or by viruses (the module is a completely new phenomenon in water supply).
The module is divided into two sections: a pre-filtration zone and a fully equipped laboratory for analysis. The module can be connected to a power grid or used alone with the internal generator.
It is equipped for remote monitoring and fitted with an alarm system with GSM and RFID locators.

The OMP-PRE-001 integrates any other modules for the purification of water and can be used as a water purification unit for freshwater sources.

The module has been designed and built around four key principles that characterise all OMP products:

- rapid deployment;
- rapid use;
- high levels of reliability;
- ease of maintenance.
OMP AQUA BOX
SPECIFICATIONS

MISSION MODULE FOR THE PURIFICATION OF WATER FROM ANY SOURCE, POWERED BY SOLAR AND WIND ENERGY
Product designed for the Italian Armed Forces.

Totally self-contained, transportable module purifies sea and brackish water for potability. Guarantees an immediate and sustained drinking water supply from sea water, lakes, lagoons, rivers, canals and polluted pipelines. Used by many organizations from the armed forces, civil protection, humanitarian aid organizations, civil engineering units to improve the level of water purification-desalination in villages and for small communities.
OMP AQUA BOX is ready for use in a few hours.
It requires no additional support structures nor external generators.
Provides more water with less energy than any other small system available today.
OMP AQUA BOX is a water purification system that uses the principle of ultra-filtration for the production of drinking water from freshwater sources and reverse osmosis for the production of drinking water from brackish water and salt water.
OMP AQUA BOX removes salts, virus, bacteria without toxic chemical treatments. The purification system operates efficiently, quietly and reliably for long periods without the need for additional supports.
OMP AQUA BOX is specifically designed for robust and reliable operation in extreme conditions.
The efficiency and general compactness of the AQUA BOX offer maximum functionality: occupying little space, it easy to transport and it can be placed in any position.

The module has been designed and built around four key principles that characterise all OMP products:
- rapid deployment;
- rapid use;
- high levels of reliability;
- ease of maintenance.

The design of the OMP AQUA BOX is unique. Its small size also means it can be loaded onto a pick-up truck or trailer with minimal effort.
OMP AQUA BOX is powered by integrated solar panels and a wind generator. These provide water and extra electricity for the camp without the need for fuel and consequently the cost of transporting fuel.
It can also be equipped with GSM and RFID locators.
OMP WA TRAILER
SPECIFICATIONS

MOBILE WATER TREATMENT UNIT IS DESIGNED TO PRODUCE SAFE DRINKING WATER FROM ANY WATER SOURCE
The OMP WaTrailer 001 Mobile Water Treatment Unit is designed to produce safe drinking water from any water source with a minimum salinity of 25.000 ppm, conventional or unconventional, such as rivers, lakes, reservoirs, harvested rainwater and groundwater.

WaTrailer 001 represents a compact multiple-use mobile unit that produces excellent quality drinking water over long periods thanks to its durable design and construction with a capacity of of 2 m3/hour.
The plant, which has a output / production of 2000 l/h, is equipped with Stainless Steel R.O. Membrane, UV Plant System with active carbon filter, Arsenic Remover and Desalinization Plant.
Mobile Water Treatment Units of various sizes to adapt and meet the customer requirements such as Government and Humanitarian organisations, Militaries.. missions all over the world.
OMP MOBILE WATER TREATMENT UNIT
SPECIFICATIONS

OMP MOBILE WATER TREATMENT UNIT REPRESENT A COMPACT MULTIPLE-USE MOBILE UNIT THAT A PRODUCES EXCELLENT QUALITY DRINKING WATER.


The OMP Mobile Water Treatment Unit is designed to produce safe drinking water - in accordance with WHO Guidelines - from any water source, conventional or unconventional, such as rivers, lakes, reservoirs, harvested rainwater and groundwater.
OMP Mobile Water Treatment Unit represents a compact multiple-use mobile unit that produces excellent quality drinking water over long periods thanks to its durable design and construction with a capacity of 5 m3/hour.
OMP also provides the required manuals, as well as training sessions.


OMP SWEDISH ARMY WATER PURIFICATION CONTAINER
SPECIFICATIONS

WATER PURIFICATION CONTAINER IS DESIGNED TO PRODUCE HYGIENE AND DRINKING WATER FROM ANY WATER SOURSE.
Product designed for Swedish Army.

Water Purification Container is designed to produce hygiene and drinking water from any water sourse conventional or not conventional such as rivers, lakes, reservoirs, harvested rainwater and groundwater (fresch or microbiological polluted water). The aims of the Water Purification Container are: - To improve the raw water quality in order to make it suitable for “Hygiene Water” production. - To produce sufficient amount of hygiene water to supply the water purification system, (Reverse Osmosis). - To fill in automatic mode a hygiene water tank container . - to fill in automatic mode a drinking water tank container. All equipment and accessory necessary for producing potable water and hygiene water will be included in WPC.

OMP provides routine maintenance and extraordinary maintenance.
OMP SWEDISH ARMY WATER TANK CONTAINER
SPECIFICATIONS

MISSION MODULE FOR THE TRANSPORT AND DISTRIBUTION OF POTABLE WATER
Product designed for Swedish Army.

The water pump shall have a variable a flow with a maximum flow of at least 500 l/min and a minimum flow of at most 50 l/min. - Capacity: 7000 lt/min - Construction: stainless steel - Generator: supplied - Dimensions: 20 ft x 8 ft x 5,6 ft
TEST UNDERTAKEN ON THE WTC -EMC compatibility according to EU Standards (Industry): CE102 MIL-STD-461F. -LOW temperature test (-32C): according to MIL-STD-810 G. -Off-Road Test: according to AECTP-400.


OMP AQUA SOL & SOLAR STATION
SPECIFICATIONS

MISSION MODULE FOR POTABILIZATION OF BRACKISH AND SALT WATER WITH GREEN ENERGY
Product designed for the Italian Armed Forces.

AQUA SOL is a water depuration system that use the Reverse Osmosis principle for the production of fresh water from sea and brackish water. Can provide to 1,400 liters of fresh water per day. This quantity of drinking water is enough to provide about 30 persons for a daily necessity: drinking, cooking and washing. OMP SOLAR STATION 1225 from OMP Engineering is a mobile photovoltaic electric generator of reduced dimensions able to take advantage of the inexhaustible source of solar energy.
he generator makes it possible to feed low voltage units and is a cost effective solution for bringing electricity to even the most difficult locations while respecting the environment.
OMP SOLAR STATION 1225 is designed to provide electricity where traditional generators may encounter difficulties of logistics (fuel management) and environmental impact (air and noise pollution).
Its compactness and convenience make it unique and ideal for application in remote areas lacking basic services (water, energy)
The energy delivered via an output 12 volt DC can be used to power any low voltage unit.
With two 150Ah batteries and a 230V/50Hz power plug, it can guarantee the use of connected loads even in prolonged periods of low insulation (night, high cloud cover,...).
OMP SOLAR STATION 1225 is also equipped with a 230V/50Hz battery charger that can be powered from the network.


It
En
Fr
Es
Water treatment
Drinking water is an essential good which should be available to everyone.
OMP Engineering designs and manufactures self-contained mobile modules for:

• Pre-treatment of water;
• Water purification;
• Water supply

The supply of more than 60 field equipment modules to the Italian Armed Forces makes OMP Engineering a leader in the emergency water treatment market.
The modules are able to provide drinking water from any water source (sea, lake, river, well ...) and with the use of any energy source (generator, grid, solar, wind ...).
Each module can be configured according to the customer's specific needs; each treatment unit can be supplied in ISO or IATA containers or carts.



OMP WA TRAILER 001
SPECIFICATIONS

MORE INFORMATION
OMP MOBILE WATER TREATMENT UNIT
SPECIFICATIONS

MORE INFORMATION
OMP SWEDISH ARMY WATER PURIFICATION CONTAINER_OMP WPC
SPECIFICATIONS

MORE INFORMATION
OMP SWEDISH ARMY WATER TANK CONTAINER_OMP WTC
SPECIFICATIONS

MORE INFORMATION
OMP AQUA SOL & SOLAR STATION
SPECIFICATIONS

MORE INFORMATION